CITATION — REFERENCE ENTRY
Across the South: The origins and development of the steel guitar in western swing — The University of Adelaide
- Key
- cundell2019-across-the-south
- Authors
- Cundell, R. Guy S.
- Issued
- 2019-7
- Type
- thesis
- Publisher
- The University of Adelaide
Raw CSL JSON
{
"URL": "https://hdl.handle.net/2440/121301",
"note": "Elder Conservatorium of Music, Faculty of Arts. Section 2.3.1 covers bluegrass dobro.",
"type": "thesis",
"genre": "PhD thesis",
"title": "Across the South: The origins and development of the steel guitar in western swing",
"author": [
{
"given": "R. Guy S.",
"family": "Cundell"
}
],
"issued": {
"date-parts": [
[
2019,
7
]
]
},
"accessed": {
"date-parts": [
[
2026,
11,
21
]
]
},
"publisher": "The University of Adelaide"
}
Claims
-
Artificial harmonics are commonly made with a finger, a knuckle or the palm of the picking hand.
"Three methods of producing artificial harmonics are commonly used and employ, alternatively, a finger, knuckle or the palm of the picking hand in the process."
-
Mike Auldridge used a Stevens bar, whose profile can be gripped strongly during rapid bar movements.
"Auldridge uses a Stevens bar (see Fig 1.7), the profile of which provides a form that can be gripped strongly as rapid bar movements are applied."
-
A heavier bar helped sustain, a tubular bar helped control vibrato, and different shapes and surface etching suited different grips.
"A heavier bar benefited note sustain, a tubular bar assisted vibrato control and a variety of grips were catered for with various shapes and surface etching."
-
Cundell writes that a bar nestles in the palm, surrounded by fingers and thumb, which gives close control of its movement and of muting.
"In contrast, a flat bar nestles in the palm of the hand, surrounded by fingers and thumb, providing acute control over manual manipulation and muting or blocking."
-
Cundell gives blocking two functions: removing extraneous noise made by the bar, and silencing strings for articulation.
"Firstly, it is a technique to eliminate extraneous noise created by the action of the steel on the strings, which is a problem that every beginner must address. Secondly, it is the art of silencing of vibrating strings in the service of articulation and, as such, is an essential element of style."
-
Cundell writes that in Graves's style, with ringing open strings, blocking was much less crucial than in the Hawaiian style that preceded it.
"Pedaled open strings would then enhance the sonorities and blocking was much less crucial than in the Hawaiian style that predated Graves."
-
Many professional steel players of the 1930s preferred bullet, or round-nosed, bars.
"Many professional steel players in the 1930s preferred bullet, or round-nosed bars. Four attributes of the design proved essential to the evolution of technique. These were, substantial mass, a round nose, a tubular body and a flat or slightly indented end."
-
Rapidly reversing the direction of the bar hand makes accurate intonation far more difficult.
"A requirement to rapidly reverse the bar hand makes accurate intonation far more difficult and further curtails possible note duration."
-
A forward slant is made by angling the bar mainly with the fingers, with little wrist movement.
"A forward slant, as shown below in Fig. 1.6, is affected by angling the bar primarily with the fingers and with minimal wrist movement."
-
Cundell writes that glissandi can adjust pitch after a note has sounded, but that constant use of this is a sign of a novice.
"Glissandi can be used to adjust pitch after a note has been initially sounded although the constant application of this device is a signifier of a novice."
-
The free movement of the bar on the strings gives the steel guitar a distinctive glissando of one or more notes.
"Free movement of the steel bar on raised steel strings also provides the instrument with the facility of a distinctive glissando of one or more notes."
-
Cundell describes six-string dobro players, with their G major tuning, as the largest body of steel guitarists that exists today.
"This may be of great significance to the largest body of steel guitarists that exists today, six string dobro players, whose G major tuning shares the intervallic configurations of Dunn’s A major."
-
Cundell credits Josh Graves with a wholesale adoption of hammer-ons and pull-offs to combine open strings and fretted notes in rapid scalar passages.
"His herculean effort succeeded, with a wholesale adoption of hammer-ons and pull-offs to combine open strings and fretted notes in rapid scalar passages."
-
In bluegrass, hammer-ons are used extensively to produce rapid scalar lines on the dobro.
"A prime example exists in bluegrass where hammer-ons are extensively used to generate rapid scalar lines on the dobro."
-
Cundell writes that hammer-ons increase speed by reducing the need for picking strokes.
"In this case, hammer-ons increase velocity by reducing the need for time consuming picking strokes."
-
Harmonics, also known as chimes, are as common in early steel guitar method books as vibrato.
"Also known as ‘chimes, the technique is as ubiquitous in early method books as vibrato."
-
Articulation and intonation at speed suffer when the bar must move more than one fret between successive notes.
"Articulation and accurate intonation at speed are interrelated and both are dependent on bar manipulation. They both suffer when the left hand is required to move the bar laterally further than a distance of a single fret between sequential notes."
-
A note on an open string cannot be inflected, approached or left with the bar, or given vibrato.
"Inflection of a note sounded on an open string is impossible. Neither anticipatory motion towards nor consequential motion away from the pitch with the steel is possible. Nor is any form of vibrato available."
-
Mixing open strings with stopped notes is a common way to play fast scalar passages.
"A common technique for accommodating fast scalar passages is the incorporation of open strings amongst stopped notes."
-
Cundell writes that mixing open strings with stopped notes dominates melodic technique in bluegrass dobro style.
"This approach provides a melodic resource to steel players of all genres although its practice dominates melodic technique in bluegrass dobro style."
-
In palm blocking the lower edge of the picking hand is lowered onto the strings; in pick blocking the picking finger returns to the string it played to damp it.
"The two techniques performed by the picking hand are palm blocking and pick blocking. Palm blocking requires the lower edge of the right hand to be lowered onto the strings to cease vibrations. Pick blocking ensues when, having picked a string, the picking finger returns to that string to dampen it."
-
A finger or knuckle makes a harmonic on a single string, while the edge of the palm can sound a whole chord in harmonics.
"A pick-less finger or knuckle can be applied to a single string only, whereas, the bottom edge of the palm can be used to the same effect but across multiple strings to sound a chord in harmonics."
-
Pick blocking can be applied rapidly and is essential to legato and staccato playing without overlapping tones.
"Pick blocking can be applied rapidly and is essential in achieving the extremes of legato and staccato expression without overlapping tones."
-
Fingerpicks allow sharper articulation in fast passages and are a necessity for acoustic players.
"Furthermore, they allow sharper articulation in rapid passages. While they are a necessity for acoustic players, some electric players elect not to use them."
-
Fingerpicks take more practice than bare fingers but give a broader range of timbre and dynamics.
"In comparison to bare fingers, finger picks are cumbersome and require practice to achieve smooth and consistent picking but they offer the player a broader range of timbre and dynamics."
-
Fingerpicks are not needed to sound the instrument but are crucial for an acoustic player to be loud enough in an ensemble.
"While these are not essential to sound the instrument, they are crucial to achieve sufficient volume for an acoustic player to participate in an ensemble."
-
Polymer bars have dense metal cores and a coating that eases glissandi and reduces string noise.
"Polymer bars have dense metal cores and a coating that enhances glissandi while reducing excessive string noise."
-
The reverse slant is a more difficult maneuver, relying mainly on the fingers, and is hard to play in tune.
"The reverse slant is a more difficult maneuver that relies primarily on manipulation of the steel with the fingers. Achieving accurate intonation is difficult and, furthermore, the adjustment of grip required is extremely awkward with a flat steel."
-
Graves's three-finger rolls across separate strings needed open strings and sustained tones that blend with the primary triads.
"Furthermore, fluid three finger rolls on separate strings (in contrast to Ho’opi’i’s single string rolls) required open strings and forgiving sustained tones that would blend with primary triads without dissonance."
-
Three-digit picking is standard in contemporary dobro style, and bluegrass players call the resulting fast arpeggios across separate strings rolls.
"The technique is also de rigueur in contemporary dobro style and is applied to separate strings for the execution of fast arpeggios, referred to by bluegrass players as rolls."
-
In triadic tunings a straight or slanted bar forms major and minor thirds and sixths, the size of the interval varied by the bar's angle.
"In triadic tunings, intervals of major and minor thirds and sixes can be formed with a straight or slanted bar. Smooth voice leading between adjacent diatonic intervals can be effectively achieved by progressing the bar horizontally or laterally without removing it from the strings, varying the size of intervals by adjusting the angle of the bar on the neck."
-
The sharper the slant, the harder accurate intonation becomes; slants spanning two frets are common but cannot be used effectively on adjacent strings.
"The more acute the angle, the more difficulty the player has in achieving accurate intonation. Bar slants that connect notes that are two frets apart are possible and commonly employed. However, such slants cannot be effectively used on adjacent strings."
-
The Stevens bar has a groove along its top for the first finger, giving a strong grip for moving the bar and for hammer-ons, and is favored in bluegrass dobro style.
"The Stevens bar, seen at bottom of Fig. 1.7, featured an indentation running along the top edge in which the first finger was placed. This ensured a strong grip with which to move the bar laterally and to perform hammer-ons. This bar is favoured in bluegrass dobro style where hammer-ons and pull-offs are de rigueur."
-
Cundell names picking, bar manipulation and string muting, or blocking, as the three core elements of steel guitar technique.
"To achieve fluent performance, three core elements of technique must be coordinated with great precision. The elements are picking, bar manipulation and string muting or ‘blocking’."
-
The bar can be tilted so that only its tip stops a single string, reducing noise from the bar on unused strings.
"Held firmly, the steel can be tilted downwards with its tail retracted into the player’s palm, exposing the tip that can be used to stop a single string, as shown in Fig 1.5 below. This technique reduces extraneous noise from the bar on unused strings and allows the player more agile movement of the left hand."
-
The principal way to remove extraneous noise is to lay the trailing fingers of the left hand across the strings.
"The principal technique to eliminate extraneous noise is to place the trailing fingers of the left hand across the strings to absorb any vibration."
-
Cundell writes that the bluegrass dobro style depended on the tuning, because its fast melodic patterns needed particular scale tones on open strings.
"The style was dependent on the tuning, with the rapid melodic patterns requiring specific scalar tones to be available on open strings."
-
Early steel guitar manuals prescribed a quivering of the fingers for vibrato, while Alvino Rey insisted the movement should come from the forearm.
"Early manuals prescribe a quivering or vibration of the fingers. Writing after the introduction of the round bar, Alvino Rey insists that the movement should originate in the forearm."
-
The speed and depth of vibrato vary with context and contribute significantly to a player's personal style.
"The speed and depth of vibrato can be varied to suit specific contexts but can also contribute significantly to personal style."
Available in