CITATION — REFERENCE ENTRY

Revision of ISO 226 "Normal Equal-Loudness-Level Contours" from 2003 to 2023 edition: The background and results — Acoustical Science and Technology

Revision abba160a-81ad-4ba8-9d59-df9329265e60 · 11/21/2026, 4:44:44 AM UTC
Key
suzuki2024-iso226-revision
Authors
Suzuki, Yôiti; Takeshima, Hisashi; Kurakata, Kenji
Issued
2024
Type
article-journal
Container
Acoustical Science and Technology
Volume
45
Issue
1
Pages
1-8
Raw CSL JSON
{
  "DOI": "10.1250/ast.e23.66",
  "URL": "https://www.jstage.jst.go.jp/article/ast/45/1/45_e23.66/_pdf/-char/en",
  "page": "1-8",
  "type": "article-journal",
  "issue": "1",
  "title": "Revision of ISO 226 \"Normal Equal-Loudness-Level Contours\" from 2003 to 2023 edition: The background and results",
  "author": [
    {
      "given": "Yôiti",
      "family": "Suzuki"
    },
    {
      "given": "Hisashi",
      "family": "Takeshima"
    },
    {
      "given": "Kenji",
      "family": "Kurakata"
    }
  ],
  "issued": {
    "date-parts": [
      [
        2024
      ]
    ]
  },
  "volume": "45",
  "container-title": "Acoustical Science and Technology"
}

Claims

  1. ISO 226:2023 differs from the 2003 edition by at most 0.6 dB and is practically the same.
    "The differences from the 2003 edition are only 0.6 dB at most, and the 2023 standard can be regarded as the same as the 2003 edition in terms of practical use."
    Locator: page: 1 (abstract) · Quote language: en
  2. The equal-loudness-level contours of the first ISO standard were based not on Fletcher and Munson's contours but on loudspeaker measurements by Robinson and Dadson in the United Kingdom in the 1950s.
    "These ELLCs were not based on the contours derived by Fletcher and Munson, but on the results obtained using loudspeakers by Robinson and Dadson [2] in the United Kingdom in the 1950's."
    Locator: section: 1 Introduction, pp. 1-2 · Quote language: en
  3. By around 1990 the data in the then-current ISO standard differed by more than 10 dB below 1 kHz from new data from Germany, Denmark and Japan.
    "By around 1990, it was clear that the data in the current ISO standard differed by more than 10 dB in the range below 1 kHz from the data of all three nations."
    Locator: section: 1 Introduction, p. 2 · Quote language: en
  4. After significant errors were reported in 1985 in the earlier standard on equal-loudness-level contours, it was fully revised as ISO 226:2003 after 18 years of revision work.
    "As significant errors were reported in 1985 for the international standard related to equal-loudness-level contours (ELLCs) for pure tones, the earlier international standard was fully revised in 2003 as ISO 226:2003, after 18 years of revision work."
    Locator: page: 1 (abstract) · Quote language: en
Available in